How to make a violin at home. In this post, I would like to guide you through all the steps I followed to make a violin. Then I’ll share with you the reason I built this, my experiences, what Kept me moving forward when I lost confidence, and some of my mistakes which you are advised to avoid, and then I will answer some frequently asked questions related to violin. Let’s get started. This blog is all about renewable energy projects. However, every once in a while I do some hobby projects. This year I got a chance to join a violin class with my friends Sanal and Aswin. And guess what, we joined an institute. Check this on Amazon https://amzn.to/3ufFjI8 When I got this chance to hold these amazing musical instruments in my hands I felt a strange inspiration to make one of them. Even though I am not good at woodworking and acoustics I decided to give it a try. But I had no idea, where do I begin. You May Also Like: How to Make Wind Turbine Propeller The Inspiration for Making a Violin W...
How to Install a submersible type water pump by yourself? I did a video on this topic few years back, it performed well on YouTube. Then many of my friends told me to write a well structured tutorial for my blog. But at that time I found it inappropriate for this blog content.
Nearly 3 years after, now I think it is a relevant content since this blog is about how to make and how to build stuffs. I strongly recommend you to watch the video first, then you can Read this post. Sometime you may find it unneccessary. However In this post I have included some images to showcase the information.
Sorry for my accent in th video. I was kind of practicing English accent by mimicking native speakers at that time, and it went completely wrong. Watch the video below first.
You may be interested in my latest project How to Make Water Pump | Solar Powered
Componets
Submersible Monoblock Pump 1HP, ( Kirloskar KOSi-135 (4 Star HP Openwell Submersible Pump (Multicolour) Click to buy.
Control Panel, Thread seal, shellac, hose clip, cable, hose collar, hose and Rope.
How to Install Submersible Water Pump – Steps
- Remove inlet and outlet Rubber Packing
- After that Connect Blue bend to inlet
- Connect Filter to Blue bend
- Remove the lifting bolts and fill water, fix bolts.
- Firstly, Fix Hose Collar
- secondly, Connect hose to the hose collar
- Then, most importantly, Connect enough length wire and Rope to the pump, and Submerse.
- Connect Wire to the controll panel and mains
- Make sure connections are right
- Then , Turn the DP SWITCH ON. Done.
Most importantly, If you found any fault or if the motor is not working, immediately turn the DP switch off and check what went wrong. Thats It, You are done.
I hope this tutorial will help you to successfully install a submersible water pump by yourself. At the same time you can Watch my video. For any clarifications in this regard comment below this post or in my YouTube channel. Thank you very much for keep in touch. Good day. Finally, Share this with your friends. If you want to make a solar powered water pump checkout my latest blog post. Cheers.
Comments
Post a Comment